Page 3 of 5

Re: Case needed

Posted: 28 Apr 2009, 12:52
by Timbe_
the skeleton costs the same as the sniper.. 150€

Re: Case needed

Posted: 11 May 2009, 17:05
by Timbe_
Well i read some reviews from both antec 1200 and cooler master sniper and...
the antec 1200 has plenty of room inside it BUT for what? CM sniper uses space just perfectly not too tight but not too loose.
it is hard to decide which :really:
and also the CM sniper runs cooler than the 1200 believe it or not
some pictures
Image
Image
Image
Image

pictures and reviews from:
http://metku.net/index.html?path=review ... /index_eng
http://metku.net/index.html?path=review ... /index_eng

Re: Case needed

Posted: 15 May 2009, 17:58
by zonda
coolermaster haf 932 ftw hehe just built my comp and what i got. the temps are soo good never gets over 50 after 2hours of crysis on full graphics :thumbup:

Re: Case needed

Posted: 15 May 2009, 23:25
by matt2000
Nice. I couldn't find a case I was happy with when I added the new stuff so I stuck with my iCute. Everything fits in fine though (despite having to use all sorts of odd screws to hold the extra HDs in) and there's somehow more empty space now than there was before. :really:

Re: Case needed

Posted: 21 May 2009, 07:02
by MaxH

Re: Case needed

Posted: 21 May 2009, 07:10
by Bobomoomin

Re: Case needed

Posted: 21 May 2009, 07:29
by MaxH
:zombie:

yer mom is soooo... nevermind. *mumble* :confused:

wth are u doing here anyways? do some km's! ;)

Re: Case needed

Posted: 21 May 2009, 20:17
by Timbe_
boys boys boys. allways posting stuff which have been linked ages ago :P even tho i saw that case in english russia about week before it got linked the first time in here

Re: Case needed

Posted: 09 Jun 2009, 15:37
by Timbe_
these are what i have planned to buy the next minute i get confirmation about my job and now i need your opinions about the gear

as GPU
ASUS ENGTX260 Matrix 200€
http://www.asus.com/product.aspx?P_ID=UcYfkNA6tbq7MmgQ
http://www.overclockersclub.com/reviews ... rix/15.htm

and the case
Cooler master storm 150€
http://www.cmstorm.com/en/products/chassis/sniper/
http://metku.net/index.html?path=review ... /index_eng

Re: Case needed

Posted: 09 Jun 2009, 17:15
by Bobomoomin
Personally, I would say to avoid an ASUS made graphcis card if you can, it will probably still do the job, however brands such as XFX, EVGA, Gainward, BFG are much more commonly known as the better performance cards.

Re: Case needed

Posted: 09 Jun 2009, 18:44
by Blackbird
Bobomoomin wrote:Personally, I would say to avoid an ASUS made graphcis card if you can, it will probably still do the job, however brands such as XFX, EVGA, Gainward, BFG are much more commonly known as the better performance cards.
Usually the only thing which differs between the brands is the sticker (and ofc stuff like cables and games which you get when you buy the card.)

But on that Asus card the sticker isn't the only difference.. ^^

Re: Case needed

Posted: 09 Jun 2009, 19:47
by JasonJ
/me rethinks cable management laws of physics.


At first I was like :confused:
Then I was like :teehee:

Re: Case needed

Posted: 13 Jun 2009, 09:08
by Timbe_
hmph i need to buy also powersuply
anything bad about this one? its 60€ so not that much.
http://www.chieftec.eu/index.php?option ... Itemid=618

Re: Case needed

Posted: 13 Jun 2009, 12:42
by Blackbird
Timbe_ wrote:hmph i need to buy also powersuply
anything bad about this one? its 60€ so not that much.
http://www.chieftec.eu/index.php?option ... Itemid=618
Buy Corsair HX520.
Corsair makes very good PSU's, infact best PSU's on the market..
The HX520 outperforms some 650w PSU's.

It maybe costs a tiny bit more than that chieftec, but it's worth it imo since the PSU is a so important component on a PC.
Also the HX520 is modular, i don't know if the chieftec is that. So you get less cables laying around in the case.

Re: Case needed

Posted: 13 Jun 2009, 13:01
by Timbe_
is it worth 30€ extra :yummy: